Bushwick Metals LLC

Call Us: 203-576-1800  |  Email Us: sales@bushwickmetals.com 


  Home     About Us     Contact Us     Locations     Processing Services     Products     Company News     Request For Quote  
Search Catalog
      GO   
 All Categories    All Categories
All Categories  
 

All Categories


Click on a category to drill down.

Bushwick Tab Pgs 1_Page_01_Image_0002

Beams


Bushwick Metals Stock Three Grades Of Structural Beams.

ASTM A992/ASTM A572-GR 50 is a High Strength Low Alloy Steel that is used in general structural applications when the structural will be riveted, bolted, or welded. ASTM A572-GR50 is Columbium-Vanadium Steel that offers a minimum yield of 50 KSI and is used whenever a cost savings from a weight reduction can be gained.
ASTM A588 is a High Strength Low Alloy Steel that is used in general structural applications when the structural will be riveted, bolted, or welded. ASTM A588 is a Copper bearing steel that offers a minimum yield of 50 KSI and has approximately two to four times the corrosion resistance of carbon steel without copper. ASTM A588 structurals are used whenever a cost savings from a weight reduction can be gained or when there are concerns about atmospheric corrosion.
ASTM A36 is a Carbon Steel that is used in general structural applications when the structural will be riveted, bolted, or welded. ASTM A36 is produced to mechanical properties offering a minimum yield of 36 KSI and a minimum tensile of 58 KSI. A36 is available as a special order from the mill.

Bushwick Tab Pgs 1_Page_03_Image_0002

Angles


Hot Rolled Carbon Steel Bar Angles and Structural Angles

Bushwick Stocks Bar Angles and Structural Angles in the following Grades:
ASTM A-36, ASTM A-572 & ASTM A-588

Bushwick Tab Pgs 1_Page_05_Image_0002

Channels


Hot Rolled Carbon Steel Bar Channels, Structural Channels and Miscellaneous Channels.

Bushwick Stocks Bar Channels, Structural Channels and Miscellaneous Channels in the following Grades:
ASTM A-36, ASTM A-572 & ASTM A-588

Bushwick Tab Pgs 1_Page_07_Image_0002

Bars


Hot Rolled Carbon Steel Bars:-

  • Merchant quality bars
    A minimum of discard is taken from the ingot during the production of Merchant Quality Bars. The bars should be free from visible piping, but seams and other surface irregularities may be present. Chemical Composition is reported only on the ladle analysis. Merchant Quality Bars are easily welded, formed, and can be machined, but are not recommended for forging, heat-treating, cold drawing, or intricate machining. Merchant Quality Bars conform to ASTM A575.
  • Special quality bars
    Special Quality Bars are produced under more stringent controls than Merchant Quality Bars. Enough of the ingot is discarded to avoid piping. Blooms and billets are inspected and prepared by grinding, scarfing, and chipping in order to minimize surface imperfections. Chemistry is subject to ladle and check analysis. Special Quality Bars are used when extensive machining and, (or), heat-treating is planned. Special Quality Bars conform to ASTM A576.
  • Low carbon bars
    M1020 is a low carbon steel with medium manganese that is produced to a specific chemical composition. M1020 bars are suitable for welding and forming applications. ASTM A-36 is produced to mechanical properties offering a minimum yield of 36 KSI and a minimum tensile strength 58 KSI. A-36 Bars are designed to be used in structural applications.
  • High Strength Low Alloy Bars
    ASTM A-588 is a high strength steel offering a minimum yield of 50KSI for bars up to 4" thick. These bars are copper bearing bars that offer approximately two to four times the corrosion resistance of carbon steel bars without copper. High Strength Low Alloy bars are used whenever a cost savings from a weight reduction can be gained or when there are concerns about atmospheric corrosion.
  • Bushwick Tab Pgs 1_Page_09_Image_0002

    Sheets


    Carbon Sheets:-

  • Hot Rolled Sheet: A Commercial Quality, low carbon steel that is soft enough to bend flat on itself in any direction without cracking. The surfaces of these sheets have a normal mill oxide and are used in applications where surface finish is not critical. Conforms to ASTM A-1011.
  • Hot Rolled Pickled and Oiled sheet: Characteristics are similar to that of Hot Rolled Commercial Quality Sheets but with an improved surface finish. Acid pickling removes surface oxides and then oil is applied to protect the surface from rust. This process creates a more uniform surface, which after cleaning improves the adhesion of paints and enamels. Conforms to ASTM A-1011.
  • Hot Rolled High Strength Low Alloy Sheet: A Hot Rolled Sheet which offers a much higher Yield Strength and more corrosion resistance than a Hot Rolled Commercial Quality Sheet. These sheets are two to four time more corrosive resistant than low carbon steel sheets and offer a Yield Strength of 50 KSI. The increased strength of these sheets makes them a good choice when a weight reduction is necessary. Sheets conform to ASTM A-606.
  • Cold Rolled Sheet: A Commercial Quality, low carbon steel that offers tighter thickness tolerances and better surface quality than Hot Rolled Pickled and Oiled Sheets. These sheets are soft enough to bend flat in any direction without cracking. The deoxidized surface offers an excellent surface for painting after the sheets are cleaned. The surfaces of theses sheets are slightly oiled to protect from rust. Conforms to ASTM A-366.
  • Galvanized Sheet: A Commercial Quality, low carbon sheet that is coated with a protective layer of zinc. The zinc coating on these sheets offer a substantial increase in corrosion resistance over an uncoated Hot Rolled Sheet. These sheets can be formed without the zinc surface flaking or peeling. Galvanized sheets can be welded or soldered. Various coating weights, spangle sizes and ASTM specifications are available, please call the Bushwick Sales office for details.
  • Bushwick Tab Pgs 1_Page_11_Image_0002

    Plates


    Bushwick Metals Stocks

    Three Grades Of Plates:-

  • ASTM A36 is a Carbon Steel that is used in general plate applications when the plate will be riveted, bolted, or welded. ASTM A36 is produced to chemical and mechanical properties that offer a minimum yield of 36 KSI and a tensile range of 58 KSI to 80 KSI on plates up to 8 inches thick. On plates 8" thick and over the minimum yield is 32 KSI.
  • ASTM A572-GR 50 is a High Strength Low Alloy Steel that is used in general plate applications when the plate will be riveted, bolted, or welded. ASTM A572-GR 50 is a Columbium-Vanadium Steel that offers a minimum yield of 50 KSI and is used whenever a cost savings from a weight reduction can be gained. Charpy V-Notch Tests available. Bushwick Metals stocks A572-GR 50 plates up to 4" thick
  • ASTM A588 is a High Strength Low Alloy Steel that is used in general plate applications when the plate will be riveted, bolted, or welded. ASTM A588 is a Copper bearing steel that offers a minimum yield in the range of 42 KSI to 50 KSI, (depending upon thickness, see table), and has approximately two to four times the corrosion resistance of carbon steel without copper. ASTM A588 plates are used whenever a cost savings from a weight reduction can be gained or when there are concerns about atmospheric corrosion. Charpy V-Notch Tests available. Bushwick Metals stocks A588 plates up to 8" thick.
  • Bushwick Tab Pgs 1_Page_13_Image_0002

    Tubing & Pipe


    Various Types Of Tubing And Pipe:-
  • Furnace-butt Welded Pipe, Continuous- Welded
    Pipe produced in continuous lengths from coiled skelp and subsequently cut into individual lengths, having its longitudinal butt joint forge welded by the mechanical pressure developed in rolling the hot-formed skelp through a set of round pass welding rolls.
  • Electric-resistance-welded Pipe
    Pipe produced in individual lengths or in continuous lengths from coiled skelp and subsequently cut into individual lengths, having a longitudinal butt joint wherein coalescence is produced by the heat obtained from resistance of the pipe to the flow of electric current in a circuit of which the pipe is a part, and by the application of pressure.
  • Seamless Pipe
    Seamless Pipe is a tubular product made without a welded seam. It is manufactured by hot working steel and, if necessary, by subsequently cold finishing the hot-worked tubular product to produce the desired shape, dimensions, and properties.
  • Round Mechanical Tubing
    Manufactured from M1010 strip steel with uniform wall thickness assured by the close strip tolerance. Welding flash is removed by either rolling or cutting. Hot Rolled is formed from Hot Rolled M1010 pickled strip and has a good finish suitable for painting. Cold Rolled is manufactured from Cold Rolled M1010 No. 2 Finish strip and is particularly adapted to applications requiring high finish. Both types can be formed, bent, swedged, flattened, etc.
  • Fence Pipe
    Strong and durable fence posts and rails made of high tensile steel, cold rolled and water quenched to resist bending and dents. A triple coat protection is applied to seal the surface, retarding oxidation and flaking to assure long lasting protection.
  • FS Tubing And Pipe
    FS tube is a hi-strength, light wall product that is designed for the awning industry and can be used in load-bearing applications. This product can be substituted for fence pipe and standard pipe. Available in two finishes: Clean-Coat, a clear acrylic which acts as a rust inhibitor and primer, and in a "Gatorshield®" Galvanized finish.
  • Bushwick Tab Pgs 1_Page_15_Image_0004

    Expanded Metal & Grating



  • Expanded Metals
    Expanded metal is a versatile material that is produced from solid sheets or plates of carbon steel, galvanized steel, stainless steel or aluminum. Expanded Metal is available in four basic types: standard (or regular), flattened, grating and architectural (or decorative) meshes. The four primary applications for expanded metal are: enclosures, protection, support and decoration.
  • Grating
    Bushwick’s Grating is manufactured by the automatic weld forge method which joins the bearing bars to the cross bars, resulting in a sturdy one piece constructed panel. Our grating is available with either a smooth or serrated surface. Typical applications are: floors, decks, fire escapes walkways, etc. Finishes available are: either a black painted finish, galvanized finish or mill finish bare. Made to NAAMM Standards.
  • Close Mesh Grating
    Close Meshed Grating is a pressure locked grating product, produced with close bar spacing to accommodate the requirements for pedestrian comfort and safety. Typical applications include: Building Entrances, Air Ducts and sidewalk installations when ventilation and easy access are required. Closed Meshed Grating is available in carbon steel, stainless steel and aluminum. This product complies with standards as established by the American Disabilities Act (A.D.A.).
  • Blank Image Asset

    Joist & Deck


    All Deck furnished by Bushwick Metals is manufactured by a Member of the Steel Deck Institute.
    • Type B Deck
      B Deck provides the best balance of strength and economy of all the 1-1/2 inch deep roof decks.
    • Type A Deck
      A Deck is designed to be installed with thinner, more economical insulation materials.
    • Type N Deck
      N Deck is designed for applications where it is desirable to space the supporting members as far apart as possible.
    • Form Deck
      Form deck can be used as a structural support for insulating roof fill systems or a permanent form for concrete floor and roof slabs.
    • 1-1/2" Composite Deck
      1-1/2" Composite Deck acts as a form during the concrete pour allowing the designer to space the structural members to over 10'O" o. c. without any additional shoring.
    • 2" Composite Deck
      2" Composite Deck acts as a form during the concrete pour allowing the designer to space the structural members to over 12'0" o. c. without any additional shoring.
    • 3" Composite Deck
      3" Composite Deck acts as a form during the concrete pour allowing the designer to space the structural members to over 14'0" o. c. without any additional shoring..
    All Joists furnished by Bushwick Metals is manufactured by a Member of the Steel Joist Institute.
    • K Series Joist
      K Series joist were mainly developed to provide a structural support for floors and roofs of buildings.
    • LH & DLH Series Joist
      Long Span and Deep Long Span Steel Joists are relatively lightweight shop-fabricated steel trusses.

    Bushwick Tab Pgs 1_Page_19_Image_0001

    Specialty Products


    Guard Rail-Standard Specifications
    1. The Guard Rail element shall be made from new billet, open hearth, basic oxygen, or electric furnace steel. Guard Rail shall conform to AASHTO M-180. Posts shall conform to ASTM A-36. The minimum yield point of the steel used in the beam and terminals shall be 50,000 PSI and 12% in 2" gage length respectively.
    2. Guard Rail and Posts shall be galvanized after fabrication to ASTM A-123, AASHTO M- 111. or New York State M-19 Type I and shall have at least 2-oz. per square foot of spelter, total for both sides. When material is specified galvanized before fabrication, galvanizing shall conform to ASTM A-525, 4-oz. coating, or A-93, 2-1/2-oz. coating. Bolts shall be galvanized to ASTM A-153, AASHTO M-111, or M-19 Type 11.
    3. Bolts shall have a round, flat head and special shoulder and shall conform to ASTM A- 307.Washers shall not be furnished for steel on steel applications unless specified.
    4. Material not galvanized shall be furnished with one shop-coat of a fast-drying, rust inhibiting primer.
    5. Unless specified otherwise at time of order, a "Fisher Compliance Certificate" shall be satisfactory evidence that the material furnished on a specific order was tested and met the requirements described herein.
    6. MAYARI-R - All material can be furnished in Mayari-R Grade R-50.
    7. Special Posts, Base Plates, and Anchor Bolts are furnished to your specifications. If you do not see the type of construction you require in this brochure, ask our Sales Department to furnish additional literature.

    Landscape Edging
    Landscape Edging is a flexible steel product which is used to define landscape borders, contain crushed rock and fill, control the spreading of grass into planted areas, and to edge driveways. Landscape Edging is maintenance free and easy to install. Produced in 10 ft., 16 ft. or 20 ft. lengths with an 8" overlap, and slotted about every 30 inches allowing for a secure and easy installation using tapered stakes. Interlocking joints are doubled staked for additional strength. Landscape Edging is available in green, black or brown colors. Installed Landscape Edging cost approximately 70% less than concrete curbing.

    Bushwick Tab Pgs 1_Page_21_Image_0002

    Stainless Steel


    Bushwick metals stocks the following seven grades of stainless steel.
    • Stainless Steel 303 is a rendition of stainless steel type 304, designed to be a free machining stainless steel to be used by automatic machining equipment. Typical end uses are: shafts, screw machine parts, gears, valve parts, etc.
    • Stainless Steel 304 is a general-purpose, Chrome-Nickel type of stainless steel that offers good formability and good weldability. Excellent stability and shock resistance at very low temperatures. Stainless Steel 304 offers good corrosion resistance in many different corrosive and atmospheric conditions. A general-purpose stainless steel that is used widely in many different applications and industries.
    • Stainless Steel 304L is a low carbon content version of Stainless Steel 304. This low carbon content version is used in order to avoid intergranular carbides during the welding process. Stainless Steel 304L has slightly lower mechanical properties than Stainless Steel 304 straight grade.
    • Stainless Steel 304 / 304L, (Dual Certified): Bushwick Metals offers many sizes of bars that are Dual Certified 304 / 304L. These bars meet the requirements of both grades: 304 and 304L. Ask your Bushwick salesperson for the specifics if you have a Dual Certified Stainless Steel 304 / 304L bar requirement.
    • Stainless Steel 316 is a Nickel-Chrome-Molybdenum type of stainless steel that offers more corrosion resistance and pitting resistance than Stainless Steel 304. Offers more strength at elevated temperatures that Stainless Steel 304. Stainless Steel 316 is formable and weldable. Stainless Steel 316 is usually called for in high temperature or corrosive applications.
    • Stainless Steel 316L is a low carbon content version of Stainless Steel 316. This low carbon content version is used in order to avoid intergranular carbides during the welding process. Stainless Steel 316L has slightly lower mechanical properties than Stainless Steel 316 straight grade. Offers the same corrosion resistance and high temperature characteristics as Stainless Steel 316 straight grade.
    • Stainless Steel 316 / 316L, (Dual Certified): Bushwick Metals offers many sizes of bars that are Dual Certified 316 / 316L. These bars meet the requirements of both grades: 316 and 316L. Ask your Bushwick salesperson for the specifics if you have a Dual Certified Stainless Steel 316 / 316L bar requirement.

    Site created by ThomasNet Web Solutions and powered by Navigator Platform

    Bushwick Metals LLC Koons Steel Azco Steel